Tag Archives: Background for trade show

Poster Hangers

Poster Hangers sold by Display Junction are light in weight for your travel purposes yet heavy compared to similar products sold by other vendors.

This 3 x 3 meter stall uses 9 pieces if hangers for full coverage yet hardly weighs 10 kilograms.

Poster hangers are extremely easy to setup. Just use top hooks to hang on octonorm panel. Bottom bar keeps pulling the graphic down and thus keeps it straight.

Here what you see is very high quality printing provided by our in-house printing services High Resolution Ink-jet printing .

We have created these prints on matte finish satin media which doesn’t require any lamination thus preventing usual curling of the printed media.

Printing is water resistant besides being archival quality.

Visit us at Poster Hanger

#CurvedMagneticPopup

Curved Magnetic Backdrop
3×3 Magnetic Popup

Stylish , attractive, portable and reusable as shown here in this  picture.

It sets up in under 15 minutes * ( with practice)

#MagneticPopups we sell are reconfigurable.

Confused ? Yes a Curved popup can be converted to straight popup by us.

Conditions do apply as graphics or print size with is different for Straight and curved #MagneticPopups.

Similarly  some fitting  would need a switch from curved to straight or vice versa.

But we can do it at a reaction of cost compare to buying a new Magnetic popup .

Ideal time to reconfigurable would be whenever you are planning change of graphics.

As reconfiguration would require graphic or print media to be replace as well.

But in a market place where most suppliers can not even provide change of graphics, we at #Displayjunction can guarantee your investment a new please of life as and when require by you.

please have a look at our offerings.

Renting Portable Backdrops

portable Backdrop

This season is unusual as many inquiries are for renting of Magnetic Pop-ups and portable exhibition kits.

Does it make financial sense ? I personally don’t think so. But there are display material sellers who, are doing this as all is fair to them in business.

Renting is great for exhibitors and a good business for some
but in many cases cost of print media or graphic is high which makes systems
expensive. As prints increase cost of refurbishing it hardly makes sense to
rent out such systems.

Magnetic Pop up Backdrop

Shelf or Display System
Magnetic Pop Up Keyboard Shelf
Bckdrop with shelf
Magnetic pop up with shelf and hangers

 

We are the only suppliers of all types of Product Display Shelf  MAGNETIC POP UP BACKDROP.
A Magnetic Pop up is generally sold with internal display system. Exhibitors aren’t aware that it’s also possible to have other kinds of shelf or hanger system installation is also possible. We at Display Junction also sell pop ups with keyboard System which is outside the system shelving solution. Product Display Shelf also has use as brochure or product display shelf. It is configurable as angular for magazines or brochures as well as keyboard or straight for product Show case.
You can visit to see products available with us by clicking on this link     Trade Show Display Banner Stands

Posted by Diaplaydude visit my website www.displayjunction.com

Portable Exhibition Kits

Magnetic Backdrop used for different Stall sizes
Multi Utility combo
One size fits all
Multi Utility Backdrop Special combo to fit different sizes of exhibition Booth

Magnetic pop-up is one of the most convenient Portable exhibition kit to carry and reuse over and over again.
Magnetic pop up is a collapsible frame which comes in basic three shapes straight, concave curve and convex curved.
Also length and height of a Magnetic Pop up may vary as per client requirement.Usual size is known as section height and section width.section width up to 4 converts in meters or close to it therefore many people feel section width is equal to a meter but usually it is between 70cm to 83cm depending on manufacturer as also on the shape of the Magnetic pop up. Total height usually is around 230cm or near it.
Besides all this it also comes as different systems though basic collapsible structure and use of magnets to attach graphics to the stand remains a perquisite.
Variance may be noticed in locking systems as some have pull up and stand system using springs,metal hook locks or plastic male female locking systems.
Front meg-bars that hold the system also vary as most system use MS rods and others may use aluminum with magnets.
Portable Exhibition Kit is supplied in three ways viz a shoulder bag, Air trolley or in a Deluxe PVC molded trolley which may double up as a Carry case cum podium with graphic attached to it.

 

Designing a magnetic pop up is usually very challenging for first timer designers.Many times they just give design suitable for solvent flex printing but Magnetic pop ups is always using inkjet technology.Printing is done on high-end photo realistic printers on self adhesive vinyls which are later mounted on .3-.4 thick rigid PVC and then scored or matched.

Reason is that its size is close to hoarding size, but viewing distance at most times is a close distance of around 6′ or so.
Most people forget that pop up’s primary aim is to catch eyeball of people visiting trade show & exhibitions.
Not just that but once they enter the exhibitors booth, it should give information about the exhibitor’s establishment and products or services offered along with pictures.

Usually the top it used half establishment name on top with tag lines or punch line and its LOGO as that is most prominent area besides central part.In between body is the most important element. Never try to cram it up with too many pictures or too much text. When choosing to fill space always be more partial to pictures and not text.

Bottom generally being less visible has addresses, URL , email Id, phone nos. Etc.
At times just one very large picture will become very effective in attracting attention and making visitor enter the exhibition booth area.
But most times use pictures judiciously.Too much text is a waste as nobody has time to stand and keep reading just high light important information and don’t use this as a brochure, most information shall be used inside a leaflet or brochure which a visitor can than read leisurely later on at office or home.

Another pitfall area is the end caps many designers ignore tha fact that it curves in U shape and major part is usually invisible to the visitor on both ends. So simply avoid spilling text on end caps. Most designers use this area to give out website or just keep it plain colour to add beauty and make pop ups look much more solid and attractive.

You can visit web site for products available for trade show, Exhibition & Events

 

Seagull shaped single piece Magnetic popup display stand

Just seven section wide approximately 6 meters wide and 2.3 meters high unit.This is unique magnetic popup display stand in the sense it uses no joins and is a single unit stand just open and its ready in Seagull shape. others will sell three stands to achieve same configuration.

MAgnetic popup extra large
Extra wide shaped Magnetic popup

As usual portable, reusable and very easy to assemble system.

Sold with a podium case.
image

 

For more details you can viait Portable Trade Show Products

Velcro POPUP @ Roadshow

This is very light popular based on use of Velcro tapes to attach graphics to the very folding, light weight and
portable system. Which is equally easy to setup and cost effective.
Print on this system is HDR fade and water resistant inkjet printed on thin canvas cloth. One also use solvent flex to reduce costs if frequent change is desired .

image

image

image

Go to my website to see more such products. http://www.displayjunction.in